Flux for Submerged arc welding
Related products
Welding Consumables
Characteristics: It is a silicon-alloyed aluminum. It is suitable for welding base metal 3003, 3004, 5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. Classification: AWS A5.10 : ER4043 ASME SFA-5.10 : ER4043 Typical chemical composition of weld metal (wt%) Si Mn Zn Fe Al 5.0 0.02 0.05 0.20 Bal Typical mechanical properties
Welding Consumables
Characteristics: LFC-711 is a flux-cored wire design to be use with CO2 gas. It can be used on all-position welding with both single and multiple pass welds on mild steels and 490N/mm2 high tensile steel. With good impact toughness, less fume, stable arc, easy slag removal and excellent X-Ray inspection. Applications: It is widely used
Welding Consumables
Super Welding Crack Checker Liquid penetrant test is one of the most popular Nondestructive testing (NDT) methods in the industry. When compare with to other NDT methods. This methods is economical, versatile, and requires minimal training, Liquid penetrant test check for material flaws open to the surface This fluid(Penetrant) seeps into any defects such as
Welding Consumables
Characteristics: LKT-56 is designed for welding of mild steel and 490N/mm2 grade steel. Commonly used is butt or fillet welding. As an all-position welding rod for TIG welding, it is especially suitable for the root pass of pipe welding. Applications: It is suitable for welding of high pressure piping for shipbuilding, petro chemistry and nuclear
Welding Consumables
Characteristics: LKE-7018 is a low hydrogen type electrode for the welding of 490N/mm2 grade high tensile steel. The welding can be done with high deposition rate, good X-ray soundness and mechanical properties. Applications: It is especially suitable for nuclear power stations, petroleum chemical plants, and heavy steel plates. Notes on Usage: 1.Dry the electrodes at
Welding Consumables
Characteristics: The weld metal of LKE-316L is a 18%Cr-12%Ni-2%Mo.It possesses properties to LKE-316 except with a much lower carbon content which reduces susceptibility to sensitization during welding. Applications: It is suitable for welding of AISI 316,316L and cladding stainless steel. Notes on Usage: 1.Dry the electrodes at 200-250°C for 60 minutes and keep at 100-150°C
Welding Consumables
Characteristics: The weld metal of LKE-309L contains more Cr, Ni than LKE-308L. The microstructure containing suitable quantity of ferrite, gives it an excellent resistance to hot cracking. It is suitable for welding of dissimilar metals, hardening alloy steel and steel with poor weldability. Applications: It is suitable for welding of stainless steel piping in refineries
Welding Consumables
Characteristics: LKE-318 is a modified 316 stainless steel which contains Nb. Good corrosion resistance to sulfuric acid and organic acid can be obtained due to its Mo and Nb content. Applications: It is suitable for welding of chemical vessels, pipe line and steel plate of AISI 316Ti/SUS 316-Ti. Notes on Usage: 1.Dry the electrodes at
